Đăng nhập Đăng ký

battery cover câu

"battery cover" là gì  
Câu ví dụĐiện thoại
  • To install batteries, open the battery cover, place batteries (1.5 V AAA) matching
    Để thay pin, mở nắp pin, thay pin (1,5 V AAA) khớp với các cực
  • Under the battery cover Nokia has wisely included a huge 1500mAh battery pack.
    Dưới nắp pin Nokia đã lắp một viên pin khổng lồ 1500mAh.
  • Turn off your device, then remove the battery cover and battery to view your IMEI
    Tắt điện thoại rồi tháo nắp pin và pin để xem số IMEI.
  • Easy ON/OFF battery cover: standard 9V battery included.
    Nắp pin BẬT / TẮT dễ dàng: bao gồm pin 9V tiêu chuẩn.
  • Therefore, in order to swap memory card, you must remove the battery cover.
    Vì vậy, để đưa thẻ nhớ vào máy, bạn sẽ phải tháo nắp pin ra.
  • When you are finished, place the micro SD card back in and put back the battery cover.
    Khi bạn đã kết thúc, đặt thẻ SD vi trở lại và đặt lại nắp pin.
  • Remove the battery cover of the Touchpad Remote Control.
    Tháo nắp pin của điều khiển từ xa Touchpad
  • When the LCD panel of the camera is facing downward, open the battery cover.
    Khi tấm màn hình LCD của máy ảnh hướng xuống dưới, hãy mở nắp pin.
  • If the electrolyte is too full, it will overflow from the small hole in the battery cover.
    Nếu chất điện phân quá đầy, nó sẽ tràn ra từ lỗ nhỏ trên nắp pin.
  • There is a microSD expansion slot behind the battery cover, as well as the SIM card slot.
    Có một khe cắm thẻ micro SD mở rộng phía sau nắp pin, cũng như khe cắm thẻ SIM.
  • Open the Magic Mouse battery cover and remove the batteries.
    Mở nắp pin Magic Mouse và tháo pin ra.
  • Always remove dust and dirt from the battery cover, and keep the battery dry and clear to prevent the battery from discharging itself.
    Luôn làm sạch bụi bẩn khỏi ngăn chứa pin, giữ pin khô và sạch sẽ để tránh tự xả.
  • Underneath the battery cover you can see the microSD card slot, the SIM compartment and the 1650 mAh battery.
    Dưới nắp pin bạn sẽ tìm thấy khe cắm thẻ nhớ microSD, khe cắm SIM và pin dung lượng 1650mAh.
  • Open the battery cover (10).
    Nắp đậy bồn cầu (10)
  • Open the Battery Cover (8).
    Nắp đậy bồn cầu (8)
  • Select the SSID of the camera; it is located on the inside of the battery cover of the camera or on the cover of the manual.
    Chọn SSID của máy ảnh; nó nằm ở trong nắp pin của máy ảnh hoặc trên trang bìa của sách hướng dẫn.
  • Now it's time to pair the remote control, we need to open the battery cover and pull out the white paper protecting the battery.
    Bây giờ là lúc ghép nối điều khiển từ xa, chúng ta cần phải mở nắp pin và kéo giấy trắng bảo vệ pin.
  • If you want to impress a potential buyer, you could apply a screen protector and replace the battery cover (if there is one).
    Nếu bạn muốn gây ấn tượng với người mua, bạn có thể sử dụng tấm dán màn hình và thay thế nắp pin (nếu có).
  • For those with little fingers it’s okay, but the opening of the Nikon Df’s battery cover is a real challenge.
    Với những người có ngón tay bé thì không sao, nhưng ngược lại, việc mở nắp pin của Nikon Df thực sự là một thử thách.
  • Even something as simple as a battery cover for a remote control can be created, reducing the need to throw the old remote away.
    Thậm chí một thứ đơn giản như nắp pin cho điều khiển từ xa có thể được tạo ra, giảm nhu cầu vứt chiếc điều khiển cũ đi.
  • thêm câu ví dụ:   1  2
  • battery     "Con, we have a problem in battery deck two." Đài chỉ huy, chúng ta có rắc...
  • cover     Take cover in there! It's like World War III out there. Nấp vào kia đi!...